Bathtubs are best for relaxation after a long tiring day. Getting a hot water bath in the tub helps to release the stress and refreshes the mind.
Getting the perfect size bathtub is hard. So, knowing how to make a bathtub of your own can help you to have your perfect tub.
Making your own bathtub gives you the liberty to have a perfect sized and shaped tub for your bathroom.
But making it may not cost as low as it can cost you buying one.
Hence, the homemade DIY bathtubs are a perfect size and also can be designed as it can fulfill all the requirements of your own.
Where the market bought tubs may not satisfy those. So, the manual can easily help you get your dream bathtub made in no time.
These bathtubs can be made from different materials which are present at your home or are easy to get.
Though the process and the product can cost you a bit, but the result can give you inner peace.
Bathtub from tile, wood, resin, cement are the most common things for making bathtubs at home. These elements are found very frequently and are easy to handle.
How to Make a Wooden Bathtub: 9 Steps
Wood bathtubs have an exquisite look. These are also easy to make, as it requires some help of the lumbers. Things needed for a wooden tub:
- Measuring tape
- Adhesive glue
- Wood finish
- Water-resistant glue
These elements can help you to build a beautiful bathtub. But to get the perfect result, you need to maintain and proceed through a short step by step process.
1. Buy woods and cut them accordingly
First, you need to buy the wood and take it to the lumbers to cut them properly. Cutting them at home may cause a difference in size.
2. Cut the wood in the required size
You need to measure the size of the tub you want to make. Then you need to cut the wood accordingly.
Use sandpaper to make the edges smooth and leave them splinters free.
3. Create a drain and faucet holder
You need to measure where and how you want your drain and faucet to be.
After you fix the place, you need to make the hole accordingly to the size and location.
4. Floor the tub with the waterproof board
You can use the waterproof board as the base of the tub. This way, the tub will be more robust and will last long.
5. Assemble all the parts
You need to assemble all the parts and screw them together. You do not need to think about the sides of the joint area for leaking.
6. Cement the corners
You now need to cement the areas from where the water can come out. Then you need to leave the tub to dry up for at least 12 hours.
7. Use adhesive to the corners
Use the adhesive to the edges to seal the area properly. The glue will also hold the tub together when there is water in it.
8. Use water-resistant glue on allover the tub
Use the water-resistant glue to cover the whole tub to give it a smooth finish and gloss.
9. Fix all the faucets and drainage pipes
Lastly, you need to fix all the faucets and pipes to it and let it rest for one day. The next day, you will find your tub ready to be used.
You can also tile the tub to give it a heavy and glossy look.
How to Make a Resin Bathtub: 9 Actionable Steps
Nowadays, people like to experiment with regular things in a different style.
As a result, transparent resin made tubs are creating that hype among those trend creators.
But the process to make a resin bathtub is quite easy, and also it looks exquisite. To make a resin tub, you will need:
- Fiberglass cloth
- Fiberglass resin
- Resin hardener
- Waxed paper
With these five ingredients, you can create something magical. But yes, it does not require any magic! All you need is to be patient and the elements.
1. Find a tub
At the very first, you need to find a tub on which you are going to make your ones.
2. Place waxed paper
After you got the tub to work on. Next, you need to cover the whole tub with waxed paper.
3. Cover with fiberglass cloth
You need to cover the area with fiberglass cloth. It will work as the mold of your tub. Dry up the frame very precisely, so that there are no more wet areas left.
4. Prepare your resin
You need to prepare your resin correctly. You are going to need a lot of resin, so pick a big container to mix it up.
Follow the instructions on the resin packet to make the perfect mixture.
5. Pour your resin to your mold
Use the resin mixture and try to pour that onto your frame. Try to cover the whole area and paint the side of the tub with a brush.
Repeat the steps a few times to give a solid structure.
6. Leave to dry up for around 10 to 12 hours
Leave the tub alone for about 10 to 12 hours. It would be best if you leave it to dry for one day.
7. Remove the resin tub out of the mold
Gently bring out the tub out of its mold. This may need extra hands to do.
8. Remove waxed paper and coat with more resin
Remove the wax paper out and coat it with more resin. Let it dry for a few hours more.
9. Fix all the faucets
After the tub is dried up, create holes for the drain pipes and faucets and place it to the place where you want it to be.
With these simple techniques, you can easily make your own bathtub. All you need is some creative ideas and patience to make your own dreamy bathtub.