For your convenience, this post has links to Amazon.
Rust stains on the floor can look a bit alarming. The most common type of rust stains are caused by hard water leaks, mildew that looks like rust, as well as rusty furniture or home decor. When it’s time to move the furniture, a rusty residue greets you as you remove it from its place. Whatever the case may be, if you are wondering how to remove rust stains from tile floor, you have come to the right place.
You can use a powdered cleaner made to remove rust from tile. Wet the surface and spread the powder. Be careful not to inhale the powder or spread it too far out. Then, use a microfiber cloth or tile grout scrubber to scrub on the rusty area. Then, rinse the area with clean water or wipe with a fresh wet towel at least 3 times. For sensitive surfaces, you’ll want to do a test clean in a small and inconspicuous area first.
In this article, you will find more easy tips and tricks on how to get rid of rust stains from tile floor. I’ll also include using simple ingredients found in any kitchen. Read on to learn more.
How to remove rust stains from tile floor
1. Powdered cleaner that removes rust from tile
There are powdered cleaners that are made for removing rust stains, especially from tile floors. You want something good enough to dilute rust, at the same time, gentle enough not to damage your tiles.
First, wet the rusted tile surface. Apply the powder carefully so that you don’t inhale any airborne particles. You just need to sprinkle the powder on the stain. The surface should be wet enough to activate the agent.
You can scrub the powered cleaner with a tile sponge.
Finally, thoroughly rinse off the cleaning solution with clean water. If you can’t rinse with water, do three rounds of wiping with a clean wet towel over the area.
2. Kerosene oil
Kerosene oil only works on pure rust stains, such as those left from iron home decor or kitchen items. You can use this method for tiny spots of rust stains, as it is not practical and a fire hazard to use for areas larger than the size of a square foot.
You can dampen a steel wool with a bit of kerosene and spread it on the stain. Then, in a circular motion wipe the stain away, gently scrubbing the surface as you go.
Rust is oxidation, which occurs when some types of metal, such as iron or steel, is exposed to oxygen and water for too long. Kerosene oil has hydrocarbons that can work on the rust to remove it, so this can be an effective solution for rust removal.
However, you need to be careful while using kerosene as this is a highly flammable substance. Keep windows open, wear protective gloves and goggles as you work with it. As soon as you wipe the stain, discard the cloth safely and keep children and pets away as you work on removing the kerosine oil residue.
3. Cola soda
Cola is a carbonated soft drink and has an acidity that can work on removing rust stains. Apply some cola straight from the bottle onto the rust stains, let the solution work on the patches before you wipe it with a cloth. Repeat, as required.
You may also use vinegar for this purpose, and it works especially well on rust stains on tile caused by hard water. The rust will react with vinegar and get diluted and hence can be removed. Simply pour about three to four tablespoons of vinegar on the stain. Let it sit on the floor to react with the rust.
You can gently scrub the stain with a stain removing brush and then wipe it with a clean cloth.Repeat the process as required. You can then mop the floor as usual.
5. Baking soda
Using baking soda to remove rust stains is one of the many uses of baking soda around the house. It is perhaps one’s best friend when it comes to cleaning clothes, walls, floors or just about anything in the house.
Mix two to three spoons of baking soda with equal parts water in a mixing bowl to form a thick paste.
Apply this paste directly over the stain. Let this mixture work on the affected areas for a few minutes.
Then, you can scrub the tile with a grout cleaning brush until you see the stain disappear. You can repeat this step as required. Keep the stain wet as you’re working on it.
Any citric-based item can work to remove rust stains. For light rust stains, lemon would be an ideal solution. Squeeze some lemon juice into a bowl. Do not dilute it with water— you need the concentrated extract. Depending on how light or hard the stain is, you may need about three or four lemons.
Pour the juice directly over the stain until it’s fully covered by lemon juice. Now if you have rock salt, you can spread some of it on the juice. Rock salt is optional, but do not substitute this with refined powder salt. Let the lemon juice and rock salt mixture rest for about thirty minutes. For hard stains, you can leave it on for longer.
After the said time interval, spray some warm water on the area and scrub well. You can use a brush with tough bristles or a steel wool. Keep in mind the impact that your brush could cause on the tile and scrub gently if needed — you don’t want cracks on the tile floor next.
Once you have scrubbed the floor, wipe it with a clean towel or mop it down. You should see most of the stains removed. Repeat this procedure a couple of times if needed until the rust stains are completely gone.
There you go! Follow these steps and get rid of those rust stains!
FAQs on how to remove rust stains from tile floor
What is the best rust remover for tile?
You can use a powdered cleaner to get rid of rust stains on tile floors. Other household ingredients to try are baking soda or vinegar, which are also effective citrus-based substances that can work on the rust to dissolve it.
Does vinegar remove rust from tile?
Vinegar works well for rust stains caused by hard water. Spray some vinegar directly on the rust stains. Let it rest for a few minutes, but don’t let it dry. If the stain is thick, you’ll have to wipe it and reapply. You may use a higher concentration of vinegar, such as cleaning vinegar, to tackle heavier rust stains. Use a grout brush to get the stains that are hard to reach in the grout lines of the tile. Then wipe it away with a clean cloth and repeat the process as required to get rid of the rust stains.
If you are wondering how to remove rust stains from tile floor, there are various ways to do this with simple products available in the kitchen, such as powdered cleaner, lemon extract, vinegar, baking soda, or even Coca-Cola.
Apply the chosen product onto the stain, let it rest for a few minutes. Once the rust has dissolved in the cleaning agent, you can scrub it away with a grout brush without causing damage to the tile floor. That should do the trick.
How to Get Rust off Linoleum – 2 Ways with Steps
How To Make Matte Porcelain Tile Shiny – 9 Step Guide
How to Remove Rust Stains from Plastic – 3 Methods with Steps
Hydrochloric Acid. I had some from my pool supplies. Splashed some on and instantly rust gone. Don’t waste your time with other crap. You can thank me later