Gorilla glue is quite a handy thing to use unless it gets stuck in unwanted places. You need to put extra care while working with gorilla glue as it doesn’t want to come off easily.
You should know how to remove gorilla glue from plastic in case it gets stuck in plastic accidentally.
No matter how careful you stay while working with gorilla glue, it will end up getting on unwanted parts.
As gorilla glue itself has plastic components in it, it is very hard to remove when it gets stuck on plastic.
As every problem has a solution, you can remove gorilla glue from plastic, as well.
Depending on the amount and the intensity, it will take a few minutes to hours to remove it completely.
Below, we have provided a step by step guide which will help you to remove gorilla glue from plastic.
How to Remove Gorilla Glue from Plastic
Step 1: Take action as soon as possible
You will need to take action immediately. Gorilla glue can form into solid very quick. It reacts with the natural moisture in the air, which makes it hard.
If it completely becomes cured, you will find a hard time to remove it. But if you can take action immediately, the work will be way easier for you.
Step 2: Collect the necessary tools and products
To remove gorilla glue from plastic, you will need a few tools and products. You will need a bowl to make a mixture of water and soap.
Then, you will need warm water and liquid soap. The main ingredients you will need are alcohol, mineral spirit, and acetone.
You will also need a cotton swab, an old piece of cotton cloth. To remove glue from hard plastic, you will need a sharp knife or a chisel.
You will also need a lubricant to soften the plastic.
Step 3: Moisture the glue with soapy water
You will need a bowl with warm water in it. Add liquid soap in the water and rinse it well. After mixing it, dip a clean cloth in it.
Then, dap the cloth on the glue. If the glue is in a big amount, then keep the cloth like this for a few hours.
Don’t forget to wrap a plastic sheet around it. It will hold the moisture in the place and soften the glue faster.
The purpose of this is to make the glue softer. You can keep this for around 2 to 3 hours.
Step 4: Use alcohol and mineral spirits to remove gorilla glue form plastic
You can use rubbing alcohol to remove gorilla glue from plastic. Rubbing alcohol is quite underrated as a cleaning product.
Rubbing alcohol will work as a solvent to make the glue dissolve. To remove gorilla glue with rubbing alcohol, you will need a clean cloth at first.
Pour rubbing alcohol in it. Instead of rubbing alcohol, you can use mineral spirits as well.
A lot of people suggest to use acetone. The advantage of using acetone is that it is one of the most effective products as it is a strong chemical.
But acetone can sometimes melt some plastics. Based on the type of plastic you need to remove the gorilla glue from, you can use either alcohol, acetone or mineral spirit.
Step 5: Don’t use acetone in case of polystyrene plastic
If the gorilla glue has stuck in polystyrene, then don’t use acetone to remove it. Acetone is a very strong chemical that will dissolve the glue in seconds.
But it will dissolve the plastic as well. So, you need to carefully choose the product you are going to use to remove gorilla glue from plastic.
If you need to use acetone anyway, you will need to go through a procedure with care.
To use acetone, dip a cotton swab in it. Then, apply it gently on the glue. Wait for a few seconds, and you will see that the glue has started to melt.
Then, wipe the glue away as soon as possible with a cotton cloth. Use an old piece of cloth which you will not need anymore.
Step 6: Wipe the gorilla glue with the wet rag
Now, you will need to wipe the glue with the rag. Make sure that the rag is wet enough to clean the glue.
After wiping the rag in one direction, you will see that the glue is gone. If it doesn’t happen, you will need to take another cloth and pour alcohol into it.
Then, wipe the part again. Doing this twice will be enough to remove gorilla glue from plastic.
Step 7: Use a knife to get rid of the cured Gorilla glue
After wiping the glue with alcohol and mineral spirit, you might find small particles of glue are attached to the plastic.
You can use a chisel or a knife to get rid of it. Also, if the surface of the plastic is harder, you can use a knife.
In case of soft plastics, we suggest not to use knife as the sharp blade can cut the plastic.
Step 8: Spray lubricant on the plastic
A lubricant will help to soften the glue in the plastic. After spraying the lubricate, collect and abrasive sponge and wipe the rest of the glue with it.
The abrasive sponges are mainly made for cleaning purposes. It is made especially for cleaning stuck dirt and debris. It will make the cleaning process easier.
If you follow the steps mentioned above, you can easily remove gorilla glue from plastic. Sometimes, it can take a few hours to complete the task.
But you will not be disappointed if you do it correctly.
Removing gorilla glue from plastic is not a very tough task to do. You will need to be careful while doing it.
With the right tools and techniques, you will be able to remove gorilla glue from plastic successfully.
Be patient while removing as you wouldn’t want to cause damage to the plastic surface.