Thinking about to restore your shed and can not come up with something that can make your home look good and cost you less at the same time?
Then you are at the right place to get the best idea to restore your shed with vinyl siding.
They are less expensive than the other siding and comes in a various range of colors.
But knowing how to install vinyl siding on a shed can also help you to save money.
And as you can install it by yourself with the help of a few tools, then you can do it whenever you want.
Vinyl sidings are comparative less expensive than the other sidings in the market. They have a very long life also.
They offer a lot of colors to choose from and also comes in with various ranges of shapes in the corners.
Which helps to install it easily in the sheds and other places. So, using the vinyl siding for your shed is the best you can get.
The installation process can be divided in some steps to help you work easily.
Check the below section to find those steps out and install your vinyl siding on the shed of your house.
How to Install Vinyl Siding on a Shed: Installation Process
The installation process requires to have some basic carpenter tools near your hand to work with.
If you now the use of them accurately, then you can install the siding in no time.
Step 1: Take the measurements of the corners and cut them accordingly
The very first thing you need to do is to take the measurements of the boxing of the vinyl shading and cut the corners of the siding accordingly.
Make sure you get the actual measurements of the shed opening to cover the whole area with the vinyl siding.
Step 2: Nail the corners along with installing j-channel and starter strip
Next, you need to nail the corners of the siding to the shed. Use a carpenters level to see if that is even or not.
Keep some extra on the top to make sure that the expanding and the compression of the vinyl siding is compatible to cover the shed all around the seasons.
Install the j-channel cups around the windows or the doors on the shed. Leave the cup side around to the siding to hold a good grip on it.
Attach your starter strip in the edges accordingly to place the bottom corners in the place.
Step 3: Measure the distance and cut the vinyl siding to place it on the starter strip
Next, get the measurements of the opening of the shed. Cut the vinyl siding according to the measurement of the opening that you have taken.
Make sure that you keep the vinyl siding cut half-inch less than the actual measurement.
After you have cut the vinyl siding according to the size, now you need to install it to the starter strips.
Placing it in the right place will hold the siding strong and stop it from falling off.
Step 4: Tuck in the siding nail to the bottom and the top
Now you need to put it in the siding nails according to the required number on the siding. Read the numbers accurately to place it in the right place.
Do the siding nails for both the bottom and the top part of the shed.
Make sure that you place one top of another in the sides to cover the whole area and add a nail to hold that together.
Step 5: Continue to cover the whole opening
Follow the working pattern to the last part of the opening side to be filled with.
You need to make a lot of attachment of the siding altogether to give it a full cover.
Besides, you may need to chop down one siding to put it horizontally to cover the narrow space on the top of the shed wall.
For this, you need to make holes in the siding, to fix it to the wall and the roof reaching to cover the whole open space.
The process can help you to install the vinyl siding to your shed very easily. You can finish the job within two days if the size of the shed in the standard limit.
Otherwise, it may take a bit more time or less time to do it.
Whatever it takes, it is confirmed that the cost of the vinyl siding will be less than the others.
So, do not think about anything else and choose vinyl siding to make the opening shed covered in no time.
But before installing one to your shed, it is better to know more about the vinyl sidings.
Take a look in the below section to know about those to work comfortably with a vinyl siding.
How to Install Top Piece of Vinyl Siding?
The vinyl siding installation is all about overlapping each other to form a shape.
And to install the top piece of vinyl siding, you need to get the measurements and cut it horizontally to fill the leftover area.
This will help you to get the job done with one piece. Make holes in the siding to attach it to the top and the bottom part of the area to give it a firm shape.
How Hard is it to Install Vinyl Siding?
Installing vinyl siding is not hard if you know how to take measurements and know the basics of the measurements count.
This way, you can easily put on the vinyl siding installation.
What Kind of Nails Do I Use for Vinyl Siding?
You need to use electro nails or the hot-dipped roofing nails to hang the vinyl siding to your house.
Make sure you get the appropriate size of the nails to do the job.
Vinyl sidings are one of the most versatile according to its longevity, color scheme, and size. That is why it is becoming so popular in recent times.
But be extra careful while choosing the siding material according to your need to have a beautiful home built.