Doing an office job is more likely to be a job where you are inclined to your chair all day long. As you spend a long period on that single chair, it needs to be comfortable.
But a leaning chair can destroy it all. So, it is better to know how to fix an office chair that leans.
Because it is not always possible to buy a new one, as that can cost a lot for you.
Office chairs are being used all day long. So, it is very much important that the chair you use is comfortable for you.
As you sit on that for around 5 to 8 hours a day, it can affect your physical health. A one-side leaning chair or an office chair tilting can severely damage your back.
So, you should know how to fix that problem, which can create severe casualties.
There are many types of office chairs in the market. So, it is not always possible to cover up the exact step by step method to fix them all.
But the given process can help you to understand the problem and get the basic idea of fixing it.
You will need a wrench, screwdriver, and a Phillips to have to fix a leaning office chair. These three small tools can help you to fix your chair of your own.
Easy Way to Fix an Office Chair That Leans
Here is a standard process that is given to help you to get the basic idea of fixing an office chair:
Sit on the chair to find the problem
At the very first to solve the problem, you need to find out where the actual problem is lying.
To know that, you need to sit on the chair and find out what problem you are facing. Is it leaning or tilting?
Turn the chair upside down
Turn the chair around and upright your chair. So that the chair seat faces the floor and the legs are upwards.
Inspect the chair wheels
As you have put the chair in an upside-down way, now you can take a look at the legs of your chairs. This way, you can easily find out the broken wheel.
Most of the time, these problems accrue due to a broken wheel. This defective chair wheel can cause the tilting of your chair to one side.
So, all you need to do is, find the broken leg and replace the wheel with a new one or tighten that up. For this, you can use a screwdriver.
Inspect if there is a missing screw
Many time the heavy duty of the chair can cause popping out of screws. That popped up screw can also cause you leaning difficulties.
And most of the time, the screw gets missing as it is small in size. To solve this problem, first, try to find the screw out from the surrounding area.
But if you can not find the screw, you will need to buy one from the hardware store.
However, keep in mind that the screw size has to be same as the others. Otherwise, the screw will not fit into the place.
To solve the size issue of the screw, take a similar screw of that area to buy the new one and fix your chair easily.
Inspect the black plate
Every hydraulic chair has a black plate under the seat. This black plate contains different screws, bolts, adjustment lever, and the hydraulic lever to that.
See if there are any missing or loose screws and bolts in that area or not. If so, replace the missing one or tighten up the loose one to fix the problem.
This job can be done with a screwdriver or a wrench. Make sure that your chairs screws are perfectly tightened or placed in the exact position.
Examine if the black plate is damaged
Sometimes, the black plate of your chair can be damaged. The damaged plate can not give the correct chair bending or tilting to you.
So, if you find that the black plate of your chair is damaged, then you might need to fix that up.
Most of the time, the black plate can not be fixed. For this state, you have to replace the full plate to adjust your chair.
The plates can be easily found from the retailer or distributor of the product.
If you have the contact address of the distributor, you can just call them and get your plate replaced easily.
This process is for the quick treatment for your office chair. But it may not always solve your chair problem.
And for that situation, some expert repairing may be needed. Expert repair may not always be a work of the product expert. It can be done by you too.
The process is given shortly to give you the idea of how to do it.
Quick Fix For Leaning Office Chair
- Open every part of your chair.
- Realign your arms and back.
- Reinstall the wheels. For this, you can replace the old ones.
- Assemble everything together.
- Look for any missing screw.
- Tighten all the screws.
- Reinstall the black plate under your chair seat.
- Check if it is working or not.
And if this process still does not work for you, it is better to take your furniture to the expert. This can save you a lot of time and your money too.
Because fixing the chair may cost cheap than buying a new one.
Fixing your leaning chair is not that hard it seems to be.
All you need to do is check thoroughly of your chair and tighten the screws, black plate, and the wheels to give a new life to your chair.
This way, you can not only save money but also can rest your back without getting it sick. Because a healthy life is the key to success.
And no other thing or element in this universe can replace the happiness of having sound health and mind for you.
How to Keep Your Office Chairs from Sinking – 4 Quick Tricks
